Why did the vacuum cleaner die? (Reasons and Prevention)

It’s hard to imagine a world without vacuum cleaners, but in the early 1900s, these machines were pretty rare. They were expensive and people didn’t really have much of a need for them. But then something changed: the vacuum cleaner was born! 

Based on the report of 2018, around 14.2 million American household has at least one vacuum cleaner that means. Many people think that the vacuum cleaner is a necessary part of their life, and they probably use it more than they think. But even the best vacuum cleaners can eventually die. 

In this article, we will explore some of the reasons why did the vacuum cleaner die and ways to prevent this from happening.

So, without any further delay, let’s jump into the main section.

Why did the vacuum cleaner die?

After years of faithful service, a vacuum cleaner may suddenly die. And you may be got puzzled as to why the machine just stopped working. A thorough inspection of the machine reveals that there are no obvious problems, but it appears that the vacuum cleaner’s motor just stopped working. Could there be a reason behind this unexpected failure?

So, why did the vacuum cleaner die? It may suck up dirt, dust, and other debris from floors and other surfaces, making them clean and tidy. It’s often because of one of these 5 reasons. 

1. The vacuum’s filters are dirty 

One of the most common reasons why vacuum cleaners stop working is because their filters are dirty. Over time, the filters in vacuum cleaners can become clogged with dirt and dust, making it difficult for the vacuum to suction up debris. 

2. The vacuum’s brush roll is clogged 

Another common reason for vacuum cleaners to stop working is a clogged brush roll. The brush roll is the part of the vacuum that helps to agitate the floor and loosen up dirt and debris. If the brush roll becomes clogged, the vacuum will have a hard time cleaning floors. 

3. The vacuum’s bag is full 

If your vacuum cleaner has a bag, it will need to be emptied when it becomes full. A full bag can cause the vacuum to lose suction, making it difficult to clean floors. To empty the bag, consult your owner’s manual. 

4. The vacuum’s hose is clogged 

If the vacuum’s hose is clogged, it can cause the vacuum to lose suction. This is also responsible for the vacuum cleaners dying.

5. The vacuum’s motor is burned out 

If the vacuum’s motor is burned out, there is a chance of not working properly or the vacuum cleaner dies. Eventually, the vacuum will not be able to generate the suction needed to clean floors. 

What to do if the vacuum stops working?

If the vacuum cleaner suddenly stops working, that means it’s dying. There are a few things that can be checked before calling a repairman. First, check to see if the vacuum cleaner is plugged into the outlet. If it is, check the circuit breaker or fuse box to see if the circuit has been tripped or blown. 

After that, if the vacuum cleaner is not plugged in or the circuit is not the problem, the next thing to check is the power cord. If the cord is damaged, it will need to be replaced. 

If the cord is not the problem, the vacuum cleaner may need a new belt. The belt can be checked by looking for cracks or fraying. If the belt is damaged, it will need to be replaced.

Is it worth repairing a vacuum cleaner?

If your vacuum cleaner is dying due to any reason like a clogged hose or dirty filters, you need to repair it or buy a new one. 

As vacuum cleaners are an essential appliance in many households, they can be expensive to replace. So, when your vacuum cleaner breaks down, you may be wondering if it’s worth repairing or not? There are a few things to consider when making your decision. 

• First, determine the severity of the problem. If your vacuum cleaner is simply not suctioning as well as it used to, it may just need a new filter or a good cleaning. These are relatively easy and inexpensive fixes. However, if your vacuum cleaner has a more serious problem, such as a broken belt or motor, the repair may be more costly. 
• In these cases, it’s important to weigh the cost of the repair against the cost of buying a new vacuum cleaner. If you have a high-end vacuum cleaner that’s less than five years old, it may be worth repairing. However, if your vacuum is more than five years old or is a lower-end model, you may be better off replacing it. 
• Another factor to consider is the warranty. If your vacuum cleaner is still under warranty, the repair may be covered. However, if the warranty has expired, you’ll likely have to pay for the repair yourself. 
• Finally, think about the convenience of repairing your vacuum cleaner. If you have to take it to a repair shop, it may be more hassle than it’s worth. However, if you’re comfortable repairing yourself, it may be worth the effort.

So, is it worth repairing your vacuum cleaner? It depends on the severity of the problem, the cost of the repair, the age of your vacuum, and your personal preference. And, if you are concerned about your vacuum cleaner and maintaining it properly, the problem won’t be more serious I believe. Then it will be worth repairing the vacuum. 

Also, you can run your vacuum cleaner like brand new if you take care of it. At the same time, you can prevent these problems also by maintaining the following things.

So, what can you do to prevent vacuum cleaners from dying?

As, vacuum cleaners are an essential part of keeping your home clean and dust-free but like any appliance, they can break down over time. To prevent your vacuum from dying prematurely, there are a few things you can do. 

• First, make sure to read the manual that came with your vacuum. This may seem like a no-brainer, but you’d be surprised how many people don’t bother to do this. The manual will tell you everything you need to know about your vacuum, including how to properly maintain it. 
• Second, empty the dustbin or bag regularly. This is one of the most important things you can do to prolong the life of your vacuum. Allowing the dustbin or bag to get too full will put unnecessary strain on the vacuum’s motor and can lead to a premature breakdown. 

• Third, don’t forget to change the filter. Depending on the type of vacuum you have, the filter will need to be changed every few months to a year. A clogged filter can also put a strain on the vacuum’s motor and lead to a breakdown. 

• Finally, have your vacuum serviced regularly. This may seem like an unnecessary expense, but it’s worth it to extend the life of your vacuum. A professional can spot potential problems and fix them before they turn into bigger issues. 

Usually, vacuum cleaners last up to 10 years. And, by following these simple tips, you can keep your vacuum running smoothly for years to come.

Cleaning process of the vacuum cleaner

We keep our house clean using vacuum cleaner. Do you think, you to clean the vacuum clenaer?

As you can prevent your vacuum cleaner from dying by keeping the bag and filter clean. So it’s crucial to know the right way to clean your vacuum cleaner. Otherwise, the wrong process may damage your vacuum cleaner. 

Almost all vacuum comes with a dustbin, the first thing you’ll want to do is empty it. If your vacuum has a bag, you’ll need to remove that as well. Once the dustbin and/or bag are empty, take a look at the brush roll. If it’s covered in hair and debris, it’s time to clean it. 

To do so, most vacuum cleaners have a release button that will allow you to remove the brush roll. Some models will also have a second release button that will allow you to remove the entire floor head. 

With the brush roll removed, use a pair of scissors to cut away any hair or debris that’s wrapped around it. If your vacuum has a self-cleaning brush roll, you can skip this step. 

Once the brush roll is clean, reassemble the vacuum and give the dustbin a good rinse with warm water. Be sure to let it dry completely before putting it back in the vacuum. If your vacuum has a bag, you can gently shake it out to remove any debris before putting it back in the vacuum. And, the disposable vacuum bags should be replaced every 1-3 months, or sooner if they become full.

After that, move to clean the filter of the vacuum cleaner. The filter is what keeps the vacuum from blowing dirt and dust back into the air. It can become clogged with dirt and dust over time, which can reduce the vacuum’s suction power and cause it to blow dirt and dust back into the air. Cleaning the filter is a simple task that only takes a few minutes. Here’s how to do it: 

1. Unplug the vacuum cleaner from the outlet. 

2. Remove the dustbin from the vacuum cleaner. 

3. Locate the filter. It is usually located behind the dustbin. 

4. Remove the filter from the vacuum cleaner. 

5. Rinse the filter with water. 

6. Allow the filter to air dry completely before putting it back in the vacuum cleaner. 

7. Replace the dustbin and plug the vacuum cleaner back into the outlet.

Moreover, the filter should be cleaned or replaced every 3-6 months, depending on the type of filter.

And that’s it! By following these simple steps, you can keep your vacuum cleaner running like new.

Tips to keep your vacuum cleaner running like new

Vacuums can last for many years if they are taken care of properly. It will prevent the reasons why did the vacuum cleaner die.

Here are some tips to keep your vacuum cleaner running like new as well as prevent vacuum cleaner from dying.

1. Empty the dustbin or canister regularly. 

Depending on the model of vacuum cleaner, you will either have a dustbin or canister that needs to be emptied after each use. Be sure to do this regularly, as a full dustbin or canister can lead to decreased suction power and decreased performance. 

2. Clean the filters. 

Most vacuum cleaners have one or more filters that need to be cleaned regularly. Check your owner’s manual to see how often the filters should be cleaned and how to do so properly. 

3. Clean the brush roll. 

The brush roll is the rotating brush that helps to agitate carpet fibers and loosen dirt and debris. Over time, the brush roll can become clogged with hair, dust, and other debris. To clean it, simply remove it from the vacuum and use a pair of scissors to cut away any tangled hair or debris. 

4. Check for blockages. 

If your vacuum cleaner isn’t performing as well as it should be, there may be a blockage somewhere in the system. Check all of the hoses and attachments for any blockages or obstructions. 

5. Store your vacuum properly. 

When not in use, be sure to store your vacuum in a cool, dry place. Avoid storing it in an attic or garage, as extreme temperatures can damage the vacuum. 

Final verdict 

There is no doubt that you can prevent your vacuum cleaner from dying and damaging by properly taking care of it. As sometimes it will be late to take necessary actions for our idleness and we need to buy a new one. 

We hope you will be aware of why did the vacuum cleaner die as well as the maintenance steps to keep your vacuum cleaner up to date.